Standard Boost Detail

“The Right Way to Clean a Car”

The “Standard Full Boost Detailing, service is meant to get your exterior and interior back to the best condition possible. Utilizing a high-quality rinse-less wash, APC (All Purpose Cleaner), as well as a chemical and mechanical decontamination process, we remove embedded contaminants and old waxes and sealants from the surface of your vehicle. This process is not only safer for your vehicle but helps promote superior bonding when wax or sealant is later applied.

Additionally, your seats, floor mats, dashboard, door panels, headliner, carpet, etc. will all be thoroughly cleaned and dressed.

If you’re looking for a safer and more efficient option to get your car washed in New York and Long Island, we are most likely the place for you.

Standard Exterior
Boost Detail

$198-$398

Exterior Cleaning

Pre-rinse with rinse-less wash and pressure washer

Rinse-less Hand Wash
APC Rinse

Wheels Cleaned
Clay Towel Treatment
Removal of Tar and Sap
Chemical Paint Decontamination
Door Jambs Cleaned

SiO2/Graphene Sealant Applied to the Exterior

Standard Interior
Boost Detail

$198-$398

Interior Cleaning

Through Interior Vacuuming
Floor Mats Cleaned
Seats Cleaned
Carpets Steam Cleaned

Thorough Cleaning of Interior Surfaces

Windows Cleaned

Interior Dressed With a UV Protectant

Standard Full
Boost Detail

$298-$498

Exterior, Interior Cleaning

Pre-rinse with rinse-less wash and pressure washer

Rinse-less Hand Wash
APC Rinse
Wheels Cleaned
Clay Towel Treatment
Removal of Tar and Sap
Chemical Paint Decontamination
Door Jambs Cleaned
Through Interior Vacuuming
Floor Mats Cleaned
Seats Cleaned
Carpets Steam Cleaned

Thorough Cleaning of Interior Surfaces

Windows Cleaned

SiO2/Graphene Sealant Applied to the Exterior
Interior Dressed With a UV Protectant

**Prices vary depending on vehicle size and condition.

How it’s Done: Exterior

STEP 1: Pre-rinse vehicle with Rinse-less wash – encapsulates surface dirt and contaminants

STEP 2: High-quality all-purpose cleaner is foamed onto wheels, tires, and areas where dirt accumulates. Areas are then gently agitated with a paint-safe body brush to remove embedded dirt

STEP 3: The vehicle is rinsed with a pressure washer to flush away the dirt

STEP 4: Embedded contaminants are removed with a clay towel and iron remover, leaving the surface of the vehicle smooth and contaminant-free

STEP 5: The vehicle is given a final rinse to remove the iron remover, and a rinse-less wash is reapplied to the vehicle. This helps to lubricate the surface which prevents damage that may be induced during the drying process

STEP 6: Application of a high-quality paint sealant. **Consider upgrading to a 3+ year ceramic coating

How it’s Done: Interior

STEP 1: Blow out the interior with compressed air

STEP 2: Thorough vacuuming of all interior surfaces that were loosened by the compressed air

STEP 3: All interior surfaces are cleaned with a rinse-less wash and gentle APC, an all-purpose cleaner

STEP 4: Apply an interior protectant to all vinyl, leather, and fabric surfaces

STEP 5: Clean all interior glass and mirrors

STEP 6: Final inspection before you drive off