Step 1: Pre-rinse vehicle with Rinse-less wash – encapsulates surface dirt and contaminants

Step 2: High-quality all-purpose cleaner is foamed onto wheels, tires, and areas where dirt accumulates. Areas are then gently agitated with a paint-safe body brush to remove embedded dirt

Step 3: The vehicle is rinsed with a pressure washer to flush away the dirt

Step 4: Embedded contaminants are removed with a clay towel and iron remover, leaving the surface of the vehicle smooth and contaminant-free

Step 5: The vehicle is given a final rinse to remove the iron remover, and a rinse-less wash is reapplied to the vehicle. This helps to lubricate the surface which prevents damage that may be induced during the drying process

Step 6: The paint is polished to safely remove the swirls and scratches. This is performed with the least aggressive polish and pad combination to help preserve your vehicle’s clear coat. If necessary, a more aggressive polish and pad combination are used to spot-correct more severe blemishes and deeper scratches

Step 7: A paint prep is applied to the vehicle to make sure nothing is left on the vehicle’s surface

Step 8: Application of a high-quality and durable ceramic coating

STEP 1: Blow out the interior with compressed air

STEP 2: Thorough vacuuming of all interior surfaces that were loosened by the compressed air

STEP 3: All interior surfaces are cleaned with a rinse-less wash and gentle APC, an all-purpose cleaner

STEP 4: Apply an interior protectant to all vinyl, leather, and fabric surfaces

STEP 5: Clean all interior glass and mirrors

STEP 6: Final inspection before you drive off